G42CrMo4 1.7231 - DIN EN 10293-2005

Grade	G42CrMo4
Germany W-Nr.	1.7231
Corresponding Standard	DIN EN 10293-2005 Steel castings for general engineering uses
Classification	Cast Steel

G42CrMo4 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo
Minimum Value	0.38	-	0.6	-	-	0.8	0.15
Maximum Value	0.45	0.6	1	0.025	0.02	1.2	0.3

G42CrMo4 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤100	Quenching + tempering (+QT1) Quenching temperature 880~950°C, oil cooling, tempering temperature 600~650°C	800~950	≥600	≥12	≥31
100＜t≤150	Quenching + tempering (+QT1) Quenching temperature 880~950°C, oil cooling, tempering temperature 600~650°C	700~850	≥550	≥10	≥27
150＜t≤250	Quenching + tempering (+QT1) Quenching temperature 880~950°C, oil cooling, tempering temperature 600~650°C	650~800	≥350	≥10	≥16
t≤100	Quenching + tempering (+QT2) Quenching temperature 880~950°C, water cooling, tempering temperature 550~600°C	850~1000	≥700	≥10	≥27

New and Old Grade Replacement List

G42CrMo4 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!