EN-GJS-400-18 5.3105 EN-GJS-400-18C - EN 1563-2018

Grade	EN-GJS-400-18
European Standard Steel Grade	5.3105
Other Names
Corresponding Standard	EN 1563-2018 Spheroidal Graphite Cast Irons
Classification	cast Iron
Density	7.1 g/cm³

EN-GJS-400-18 Mechanical Properties

condition	Mark	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Casting specimen; t≤30	EN-GJS-400-18	≥400	≥250	≥18
Casting specimen; 30<t≤60	EN-GJS-400-18	≥390	≥250	≥15
Casting samples; 60<t≤200	EN-GJS-400-18	≥370	≥240	≥12
Base specimen; t≤30	EN-GJS-400-18C	≥390	≥250	≥15
Base specimen; 30<t≤60	EN-GJS-400-18C	≥370	≥240	≥12
Body sample; 60<t≤200	EN-GJS-400-18C	≥350	≥230	≥10
Castings; t≤60					130~175
Castings; 60 < t ≤ 200					130~175

• Samples cut from the casting the letter “C” is added at the end of the designation by symbol. e.g. EN-GJS-800-2C

Approximate Comparison Table Cast Iron

China	Japan	United States	International Organization for Standardization	France	European Standard		Sweden	United Kingdom	Australia
GB	JIS	ASTM	ISO	NF EN/NF	EN	Numerical Grade	SS	BS EN/BS	Australian Standard AS
QT400-18	FCD400-18	60-40-18	400-18 400-18/S 400-18/U	400-18 FGS400-18	EN-GJS-400-18	5.3105 (EN-JS1020)	0717-02	400/18	300-17

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!