5083 - ASME SB-928/SB-928M-2023

Grade	5083
Corresponding Standard	ASME SB-928/SB-928M-2023 High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
Classification	Aluminum and Aluminum Alloys

5083 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	0.4	0.05	-	-	-	4	-	-	Al:余量
Maximum Value	0.4	0.4	1	0.25	0.1	0.15	0.25	4.9	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

5083 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
1.6＜t≤12.5	Strain - Only Hardening (H116)	305~385	≥215	L0=50mm: ≥10
12.5＜t≤30	Strain - Only Hardening (H116)	305~385	≥215	L0=5D: ≥10
30＜t≤40	Strain - Only Hardening (H116)	305~385	≥215	L0=5D: ≥10
40＜t≤80	Strain - Only Hardening (H116)	285~385	≥200	L0=5D: ≥10
3.2＜t≤5	Strain - Hardening and Stabilization (H321)	305~385	≥215	L0=50mm: ≥10
5＜t≤12.5	Strain - Hardening and Stabilization (H321)	305~385	≥215	L0=50mm: ≥12
12.5＜t≤40	Strain - Hardening and Stabilization (H321)	305~385	≥215	L0=5D: ≥10
40＜t≤80	Strain - Hardening and Stabilization (H321)	285~385	≥200	L0=5D: ≥10
4＜t≤8	H128*	305~385	≥215	L0=50mm: ≥10

5083 Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	5083
2	DIN 1725-1-1983
	5083 AlMg4.5Mn 3.3547
3	GB /T 3190-2020
	5083
4	JIS H 4040-2015
	5083 A5083 BE A5083 BD A5083 W
5	GB /T 3191-2019
	5083 (LF4)
6	ASME SB-928/SB-928M-2023
	5083
7	GB /T 3880.1-2012
	5083

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!