5383 - ASME SB-928/SB-928M-2023

Grade	5383
Corresponding Standard	ASME SB-928/SB-928M-2023 High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments
Classification	Aluminum and Aluminum Alloys

5383 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual ^*	Other Total	More
Minimum Value	-	-	0.7	-	-	-	-	4	-	-	Al:余量
Maximum Value	0.25	0.25	1	0.25	0.2	0.15	0.4	5.2	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

5383 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
3＜t≤12.5	Strain - Only Hardening (H116)	330~400*	≥230	L0=50mm: ≥10
12.5＜t≤50	Strain - Only Hardening (H116)	330~400*	≥230	L0=5D: ≥10
3＜t≤12.5	Strain - Hardening and Stabilization (H321)	330~400	≥230	L0=50mm: ≥10
12.5＜t≤50	Strain - Hardening and Stabilization (H321)	330~400	≥230	L0=5D: ≥10

5383 Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	5383
2	GB /T 3190-2020
	5383
3	ASME SB-928/SB-928M-2023
	5383
4	GB /T 3880.1-2012
	5383

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!