HSb61-0.8-0.5 - GB /T 26048-2010

Grade	HSb61-0.8-0.5
Corresponding Standard	GB /T 26048-2010 Free-Cutting Copper alloy wire
Classification	Copper and Copper Alloys

HSb61-0.8-0.5 Chemical Element Composition Content (%)

Component	Fe ^*	Si	Cu	Pb ^*	Sb	Cd ^*	Other Total ^*	More
Minimum Value	-	0.3	59	-	0.4	-	-	Zn:余量； Ni+Sn+B:0.05~1.2
Maximum Value	0.2	1	63	0.2	1.2	0.01	0.3	Zn:余量； Ni+Sn+B:0.05~1.2

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

HSb61-0.8-0.5 Mechanical Properties

diameter( Distance Between Parallel Surfaces) d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
≥0.5~12	1/2 Hard (Y2)	≥380	≥8
≥0.5~12	Hard (Y)	≥400	≥5

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!