HPb62-3 C36000 - GB /T 26048-2010

Grade	HPb62-3
China ISC	C36000
Corresponding Standard	GB /T 26048-2010 Free-Cutting Copper Alloy Wire
Classification	Copper and Copper Alloys
Properties	Machinability

HPb62-3 Chemical Element Composition Content (%)

Component	Fe	Cu	Pb	Other Total	More
Minimum Value	-	60	2.5	-	Zn:余量
Maximum Value	0.35	63	3.7	0.85	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

HPb62-3 Mechanical Properties

diameter( Distance Between Parallel Surfaces) d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
≥0.5~2	1/2 Hard (Y2)	≥420	≥3
≥2~4	1/2 Hard (Y2)	≥410	≥4
≥4~12	1/2 Hard (Y2)	≥400	≥4
≥0.5~12	Hard (Y)	≥430	-

Approximate Comparison Table Brass

China

United States

International Organization for Standardization

Germany

European Standard

Russia

United Kingdom

ISC

ASTM

UNS

ISO

Numerical Grade

DIN EN/DIN

W-Nr.

Numerical Grade

GOST

Commercial Grade

BS EN/BS

HPb62-3

C36000

62Cu-35Zn-3Pb

C36000

CuZn36Pb3

C36000

CuZn36Pb3

C36000
2.0375

CuZn36Pb3

CW603N

ЛС62-3

CZ124

C36000

HPb62-3 Corresponding Standards(Same grade name, different standards)

1	GB /T 5231-2012
	HPb62-3 C36000
2	GB /T 26048-2010
	HPb62-3 C36000

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!