FeP01 - EN 10130-1991

Grade	FeP01
Corresponding Standard	EN 10130-1991 Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
Classification	Carbon Steel

FeP01 Chemical Element Composition Content (%)

Component	C	Mn	P	S
Minimum Value	-	-	-	-
Maximum Value	0.12	0.6	0.045	0.045

FeP01 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
flat material; flat; t ≤ 0.5	270~410	140~320	≥24
flat material; flat; 0.5 < t ≤ 0.7	270~410	140~300	≥26
flat material; flat; 0.7 < t ≤ 3	270~410	140~280	≥28

New and Old Grade Replacement List

Corresponding Standard	Grade
EN 10130-1991	Grade
EN 10130-2006	Grade European Standard Steel Grade

Approximate Comparison Table High-Quality Carbon Structural Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	SAE	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
08 08F	SPCC	1008 1010	Cr01 CR22	FeP01 St12	C F12 FeP01	DC01 FeP01	1.0330	08kp 08ps	1142	CR4 FeP01

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!