FeP05 - EN 10130-1991

Grade	FeP05
Corresponding Standard	EN 10130-1991 Cold Rolled Low Carbon Steel Flat Products for Cold Forming - Technical Delivery Conditions
Classification	Carbon Steel

FeP05 Chemical Element Composition Content (%)

Component	C	Mn	P	S
Minimum Value	-	-	-	-
Maximum Value	0.06	0.35	0.025	0.025

FeP05 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
flat material; flat; t ≤ 0.5	270~330	140~240	≥36
flat material; flat; 0.5 < t ≤ 0.7	270~330	140~200	≥38
flat material; flat; 0.7 < t ≤ 3	270~330	140~180	≥40

New and Old Grade Replacement List

Corresponding Standard	Grade
EN 10130-1991	Grade
EN 10130-2006	Grade European Standard Steel Grade

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!