FeP06 - EN 10130-1991

Grade	FeP06
Corresponding Standard	EN 10130-1991 Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
Classification	Alloy Steel

FeP06 Chemical Element Composition Content (%)

Component	C	Mn	P	S	Ti
Minimum Value	-	-	-	-	-
Maximum Value	0.02	0.25	0.02	0.02	0.3

FeP06 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
flat material; flat; t ≤ 0.5	270~350	120~240	≥34
flat material; flat; 0.5 < t ≤ 0.7	270~350	120~200	≥36
flat material; flat; 0.7 < t ≤ 3	270~350	120~180	≥38

New and Old Grade Replacement List

Corresponding Standard	Grade
EN 10130-1991	Grade
EN 10130-2006	Grade European Standard Steel Grade

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!