Grade 1 R50250 - ASTM B348-2013

Grade	Grade 1
USA UNS	R50250
Corresponding Standard	ASTM B348-2013 Standard Specification for Titanium and Titanium Alloy Bars and Billets
Classification	Titanium and Titanium Alloys
Properties	Corrosion Resistance Low-Temperature Toughness Impact Toughness Weldability

Grade 1 Chemical Element Composition Content (%)

Component	Fe	C	N	H	O	Other Individual	Other Total
Minimum Value	-	-	-	-	-	-	-
Maximum Value	0.2	0.08	0.03	0.015	0.18	0.1	0.4

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Grade 1 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Reduction of Area ψ %	Hardness HBW
Bars, billets; d≤76; S≤64.5	Annealing	≥240	≥138	≥24	≥30

Approximate Comparison Table Processing Titanium and Titanium Alloys

China	Japan	United States		International Organization for Standardization	Germany		France	Russia
GB	JIS	ASTM	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST
TA1	Class 2 Ti≥99.49	Grade 1	R50250	Grade 1(Ti≥99.53)	Ti2(Ti≥99.50)	3.7035	T-40(Ti≥99.54)	ВТ1-00(Ti99.57)

Grade1 Corresponding Standards(Same grade name, different standards)

1	ASTM B348-2013
	Grade 1 R50250
2	ASTM B265-2015
	Grade 1 R50250

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!