Grade 6 R54520 - ASTM B348-2013

Grade	Grade 6
USA UNS	R54520
Corresponding Standard	ASTM B348-2013 Standard Specification for Titanium and Titanium Alloy Bars and Billets
Classification	Titanium and Titanium Alloys
Properties	Corrosion Resistance

Grade 6 Chemical Element Composition Content (%)

Component	Fe	C	N	Al	Sn	H	O	Other Individual	Other Total
Minimum Value	-	-	-	4	2	-	-	-	-
Maximum Value	0.5	0.08	0.03	6	3	0.015	0.2	0.1	0.4

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Grade 6 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
Bars, billets; d≤76; S≤64.5	Annealing	≥828	≥795	≥10	≥25

Approximate Comparison Table Processing Titanium and Titanium Alloys

China	United States		International Organization for Standardization		Germany		France	Russia	United Kingdom
GB	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
TA7	Grade 6	R54520	Ti-5Al-2.5Sn	R54520	TiAl5Sn2	3.7115 R54520	T-A5E R54520	ВТ5-1	Ti-5Al-2.5Sn R54520

Grade6 Corresponding Standards(Same grade name, different standards)

1	ASTM B348-2013
	Grade 6 R54520
2	ASTM B265-2015
	Grade 6 R54520
3	ASTM A646/A646M-2024
	Grade 6 4335 Mod.
4	ASME SA-334/SA-334M-2023
	Grade 6
5	ASTM A334/A334M-2004(R2021)
	Grade 6
6	ASME SA-333/SA-333M-2023
	grade 6

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!