A653 CS Type C - ASTM A653/A653M-2023

Grade	A653 CS Type C
Corresponding Standard	ASTM A653/A653M-2023 Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy- Coated (Galvannealed) by the Hot-Dip Process
Classification	Carbon Steel

A653 CS Type C Chemical Element Composition Content (%)

Component	C	Mn	P	S	Cr	Ni	Cu	Mo	Ti	V	Nb
Minimum Value	-	-	-	-	-	-	-	-	-	-	-
Maximum Value	0.08	0.6	0.1	0.035	0.15	0.2	0.25	0.06	0.025	0.008	0.008

• Al, N, B elements are not specified limits, but the analysis results should be reported.
• When the application requires the deoxidation method of steel, the buyer can add a minimum content of 0.01% Al to CS and FS at the time of ordering
• For carbon levels less than or equal to 0.02 %, it is permissible to use vanadium, columbium, or titanium, or combinations thereof, as stabilizing elements at the producer’s option. In such case, the limits for these elements are 0.10 % for vanadium or columbium and 0.15 % for titanium.

A653 CS Type C Mechanical Properties

Yield Point σ_s Mpa	Elongation or Extension Rate δ %
170~410	≥15

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!