GX3CrNiMoCuN26-6-3-3 1.4517 - SEW 410-2017

Grade	GX3CrNiMoCuN26-6-3-3
	1.4517
Corresponding Standard	SEW 410-2017 Technical delivery conditions for corrosion resistant steel castings
Classification	Cast Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

GX3CrNiMoCuN26-6-3-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	-	24.5	5	2.75	2.5	0.12
Maximum Value	0.03	1	2	0.03	0.02	26.5	7	3.5	3.5	0.25

GX3CrNiMoCuN26-6-3-3 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Casting; t≤200	Solution Annealing and Quenching	650~850	≥480	≥22	≥60
Casting; t≤200			≥390
Casting; t≤200			≥330
Casting; t≤200			≥295
Casting; t≤200			≥280

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!