F468D Cu 464 C46400 - ASTM F468-2023

Grade	F468D Cu 464
USA UNS	C46400
Corresponding Standard	ASTM F468-2023 Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
Classification	Copper and Copper Alloys

F468D Cu 464 Chemical Element Composition Content (%)

Component	Fe	Cu	Pb	Sn	More
Minimum Value	-	59	-	0.5	Zn:Balance
Maximum Value	0.1	62	0.2	1	Zn:Balance

* Minimum content of copper plus all other elements with specified limits shall be 99.6%.

F468D Cu 464 Mechanical Properties

Nominal Thread d in.	Mark	Heat Treatment or Condition	Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %	Hardness HBW
All specifications; full-size samples	F468D	Forming or Stress Relieving*	50~80	≥15		HRB 55~75
All specifications; Machined samples	F468D	Forming or Stress Relieving*	≥50	≥15	≥25	HRB 55~75

Approximate Comparison Table Copper and Copper Alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
C4640	C46400	CuZn38Sn1	CuZn38Sn1	2.0530	CuZn38Sn1	CuZn38Sn1As	CW717R	LO60-1	CZ112

F468DCu464 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!