F468 Cu 715 C71500 - ASTM F468-2023

Grade	F468 Cu 715
USA UNS	C71500
Corresponding Standard	ASTM F468-2023 Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
Classification	Copper and Copper Alloys

F468 Cu 715 Chemical Element Composition Content (%)

Component	Fe	Mn	Ni	Pb	Zn	More
Minimum Value	0.4	-	29	-	-	Cu:Balance
Maximum Value	1	1	33	0.05	1	Cu:Balance

• Silver is to be counted as copper
• Minimum content of copper plus all other elements with specified limits shall be 99.5%.

F468 Cu 715 Mechanical Properties

Nominal Thread d in.	Mark	Heat Treatment or Condition	Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %	Hardness HBW
All specifications; full-size samples	F468R	Forming or Stress Relieving*	55~85	≥20		HRB 60~95
All specifications; Machined samples	F468R	Forming or Stress Relieving*	≥55	≥20	≥45	HRB 60~95

Approximate Comparison Table Wrought Cupronickel

China		Japan	United States		International Organization for Standardization		France	Russia	United Kingdom
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	GOST	Commercial Grade	BS EN/BS
B30	T71400	C7151 C71500	70Cu-30Ni	C71500	CuNi30	C71500	CuNi30	МН30 C71500	CN106	C71500

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!