AlZnMgCu1.5 F53 3.4365.71 - DIN 1745-1-1983

Grade	AlZnMgCu1.5 F53
Germany W-Nr.	3.4365.71
Corresponding Standard	DIN 1745-1-1983 Wrought Aluminium And Aluminium Alloy Plate, Sheet and Strip Greater than 0,35 Mm in Thickness; Properties
Classification	Aluminum and Aluminum Alloys
Density	2.8 g/cm³

AlZnMgCu1.5 F53 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	-	0.18	1.2	-	5.1	2.1	-	-	Ti+Zr≤0.25
Maximum Value	0.5	0.4	0.3	0.28	2	0.2	6.1	2.9	0.05	0.15	Ti+Zr≤0.25

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

AlZnMgCu1.5 F53 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Thick Plate, Thin Plate; 6＜t≤12	Artificial Aging F53 (.71)	≥530	≥450	≥8(A5)	≈140(HB 2.5/62.5)
Thick plate, thin sheet; 12<t≤25	Artificial Aging F53 (.71)	≥530	≥450	≥5(A5)	≈140(HB 2.5/62.5)
Thick plates; 25 < t ≤ 50	Artificial Aging F53 (.71)	≥530	≥450	≥3(A5)	≈140(HB 2.5/62.5)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!