En202 - BS 970-1955

Grade	En202
Corresponding Standard	BS 970-1955 Wrought Steels IN THE FORM OF BARS, BILLETS AND FORGINGS UP TO 6 IN. RULING SECTION FOR AUTOMOBILE AND GENERAL ENGINEERING PURPOSE
Classification	Carbon Steel

En202 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	-	0.05	1.2	-	0.1
Maximum Value	0.18	0.35	1.5	0.05	0.18

En202 Mechanical Properties

diameter or width across flats d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Bars, billets, forgings, mechanical bars, bright bars; d≤28.6	Heat Treatment	≥587	≥20	≥41

• d-diameter or width across flats/mm
• The unit conversion for strength is based on: 1tons/sq.in=15.44N/mm2
• The unit conversion for impact energy absorption is based on: 1ft.lb=1.3558J

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!