ZG16Cr9Mo1 - GB /T 32255-2015

Grade	ZG16Cr9Mo1
Corresponding Standard	GB /T 32255-2015 General Martensitic Stainless Steel and Alloy Steel Castings Suitable for High Temperature and High Pressureservice
Classification	Cast Steel

ZG16Cr9Mo1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	V
Minimum Value	0.12	-	0.35	-	-	8	-	-	0.9	-
Maximum Value	0.19	1	0.65	0.03	0.03	10	0.4	0.3	1.2	0.05

ZG16Cr9Mo1 Mechanical Properties

thickness t mm	Test Temperature	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
Castings; t≤150	Room Temperature	960~1020°C Normalizing + 680~740°C Tempering	620~795	≥415	≥18	≥27
Casting		Normalizing + Tempering		≥375
Casting				≥355
Casting				≥345
Casting				≥320
Casting				≥295
Casting				≥265

Approximate Comparison Table Heat-Resistant Cast Steels and Alloys

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!