P355Q 1.8866 - EN 10028-6-2017

Grade	P355Q
European Standard Steel Grade	1.8866
Corresponding Standard	EN 10028-6-2017 Flat Products Made of Steels for Pressure Purposes - Part 6: Weldable Fine Grain Steels Quenched and Tempered
Classification	Alloy Steel

P355Q Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	Ti ^*	V ^*	Nb ^*	Zr ^*	B
Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Maximum Value	0.16	0.4	1.5	0.025	0.01	0.3	0.5	0.3	0.25	0.015	0.03	0.06	0.05	0.05	0.005

P355Q Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t ≤ 50	490~630	≥355	≥22
50＜t ≤ 100	490~630	≥335	≥22
100＜t ≤ 200	450~590	≥315	≥22

Approximate Comparison Table Pressure-Bearing Flat Steel

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
P355Q	P355Q	1.8866

P355Q Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!