2014A - GB /T 3880.1-2012

Grade	2014A
Corresponding Standard	GB /T 3880.1-2012 Wrought Aluminium and Aluminium Alloy Plate, Sheets and Strips for General Engineering - Part 1: Technical Conditions of Delivery
Classification	Aluminum and Aluminum Alloys

2014A Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Ni	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	0.5	0.4	-	-	3.9	-	-	0.2	-	-	Al余量；Zr+Ti≤0.20
Maximum Value	0.5	0.9	1.2	0.1	0.1	5	0.15	0.25	0.8	0.05	0.15	Al余量；Zr+Ti≤0.20

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China	Japan	United States		International Organization for Standardization		France	European Standard	United Kingdom
GB	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	EN	Commercial Grade	BS EN/BS
2014A	2014A A92014	2014A	A92014	AlCu4SiMgMn(A)	A92014	A-U4SG(A) 2014 A92014	EN-AW-AlCu4SiMg(A)	H15	2014A A92014

2014A Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	2014A
2	GB /T 3190-2020
	2014A
3	JIS H 4040-2015
	2014A A2014ABE A2014ABD
4	GB /T 3191-2019
	2014A
5	GB /T 3880.1-2012
	2014A
6	JIS H 4000-2022
	2014A A2014AP

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!