X11CrNiMnN19-8-6 1.4369 - DIN EN 10151-2002

Grade	X11CrNiMnN19-8-6
Germany W-Nr.	1.4369
Corresponding Standard	DIN EN 10151-2002 Stainless steel strip for springs — Technical delivery conditions
Classification	Austenitic Stainless Steel

X11CrNiMnN19-8-6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	0.07	0.5	5	-	-	17.5	6.5	0.2
Maximum Value	0.15	1	7.5	0.03	0.015	19.5	8.5	0.3

X11CrNiMnN19-8-6 Mechanical Properties

condition	Heat Treatment or Condition	Hardness HBW	Deflection f mm
Strip; 0.05＜t≤0.25	Cold Rolled + C1150		Bending Capacity r/t: tr. ≤0.5 long. ≤3
Strip; 0.25＜t≤0.5	Cold Rolled + C1150		tr. ≤2 long. ≤5
Strip; 0.5＜t≤0.75	Cold Rolled + C1150		tr. ≤3 long. ≤6.5
Strip; 0.75＜t≤1	Cold Rolled + C1150		tr. ≤4 long. ≤9
Strip; 0.05＜t≤0.25	Cold Rolled + C1300		tr. ≤2 long. ≤5
Strip; 0.25＜t≤0.5	Cold Rolled + C1300		tr. ≤3 long. ≤9
Strip; 0.5＜t≤0.75	Cold Rolled + C1300		tr. ≤4 long. ≤10
Strip; 0.75＜t≤1	Cold Rolled + C1300		tr. ≤6 long. ≤11
Strip; 0.05＜t≤0.25	Cold Rolled + C1500		tr. ≤3 long. ≤10
Strip; 0.25＜t≤0.5	Cold Rolled + C1500		tr. ≤4 long. ≤14
Strip; 0.5＜t≤0.75	Cold Rolled + C1500		tr. ≤6 long. ≤16
Strip; 0.75＜t≤1	Cold Rolled + C1500		tr. ≤9 long. ≤18
Strip	Cold Rolling	HV: 300~450 Tol. ±25HV HV: 451~475 Tol. ±30HV

X11CrNiMnN19-8-6 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!