S2 629-590 Cat2 - BS 3059-2-1990 - H2ABC

中文版

Grade	S2 629-590 Cat2
Corresponding Standard	BS 3059-2-1990 Steel Boiler and Superheater Tubes - Part 2. Specification For Carbon, Alloy and Austenitic Stainlesssteel Tubes with Specified Elevated Temperature Properties
Classification	Alloy Steel
Density	7.73 g/cm³

S2 629-590 Cat2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni ^*	Cu ^*	Mo	Al	Sn ^*
Minimum Value	-	0.25	0.3	-	-	8	-	-	0.9	-	-
Maximum Value	0.15	1	0.6	0.03	0.03	10	0.3	0.25	1.1	0.02	0.03

S2 629-590 Cat2 Mechanical Properties

condition	Test Temperature	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Steel pipe	Room Temperature		590~740	≥400	≥18
Steel pipe		Normalizing + Tempering		Rp0.2≥322
Steel pipe		Normalizing + Tempering		Rp0.2≥316
Steel pipe		Normalizing + Tempering		Rp0.2≥311
Steel pipe		Normalizing + Tempering		Rp0.2≥290
Steel pipe		Normalizing + Tempering		Rp0.2≥235

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!