6ХВ2С - GOST 5950-2000

Grade	6ХВ2С
Corresponding Standard	GOST 5950-2000 Tool Alloy Steel Bars, Strips and Coils. General Specifications
Classification	Tool Steel

6ХВ2С Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	W
Minimum Value	0.55	0.5	0.15	-	-	1	-	-	-	2.2
Maximum Value	0.65	0.8	0.45	0.03	0.03	1.3	0.4	0.3	0.3	2.7

① It is allowed to replace tungsten partially with molybdenum in tungsten steels: one fraction of the total mass of tungsten is equivalent to one fraction of the total mass of molybdenum.
The quantity of the replaced tungsten shall be no more than 0.1 % in steels with the fraction of the total mass of tungsten not exceeding 1.5 %. It shall be no more than 0.2 % in steels with the fraction of the total mass of tungsten not exceeding 2 %.
The sum fraction of the total mass of tungsten and molybdenum shall not exceed the specified fraction of the total mass of tungsten.

6ХВ2С Mechanical Properties

product	Heat Treatment or Condition	Hardness HBW
Steel	Delivery Condition + Cold Processing	Indentation Diameter ≥ 3.8mm ≤255
Steel	Quenching 860~900°C oil cooling, Tempering 180±10°C	HRC≥57

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!