6Х3МФС ЭП788 - GOST 5950-2000

Grade	6Х3МФС
Old Grade
Corresponding Standard	GOST 5950-2000 Tool alloy steel bars, strips and coils. General specifications
Classification	Tool Steel

6Х3МФС Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	V
Minimum Value	0.55	0.35	0.2	-	-	2.6	-	-	0.2	0.3
Maximum Value	0.62	0.65	0.6	0.03	0.03	3.3	0.4	0.3	0.5	0.6

② It is allowed to replace molybdenum partially with tungsten in molybdenum steels: one fraction of the total mass of molybdenum is equivalent to two fractions of the total mass of tungsten.
The quantity of the replaced molybdenum shall be no more than 0.1 % in steels with the fraction of the total mass of molybdenum not exceeding 1.2 % inclusive. It shall be no more than 0.2 % in steels with the fraction of the total mass of milybdenum exceeding 1.2 %.
The sum fraction of the total mass of tungsten, counted to molybdenum, and molybdenum itself shall not exceed the specified fraction of the total mass of molybdenum.

6Х3МФС Mechanical Properties

product	Heat Treatment or Condition	Hardness HBW
Steel	Delivery Condition + Cold Processing	Indentation Diameter ≥ 3.9mm ≤241
Steel	Quenching 980~1020°C oil cooling	HRC≥56

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!