NA 15(H) - BS 3076-1989

Grade	NA 15(H)
Corresponding Standard	BS 3076-1989 Specification for Nickel and Nickel Alloys: Bar
Classification	Nickel and Nickel Alloys

NA 15(H) Chemical Element Composition Content (%)

Component	C	Si	Mn	S	Cr	Ni ^*	Cu	Ti	Al	More
Minimum Value	0.05	-	-	-	19	30	-	0.15	0.15	Fe: Remainder
Maximum Value	0.1	1	1.5	0.015	23	35	0.75	0.6	0.6	Fe: Remainder

* Including not more than 2% cobalt

NA 15(H) Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
Bar (Round, Square, Rectangular, and Hexagonal); All Sizes	cold worked and solution treated*	≥450	≥170	≥30
round bars; all size	hot worked and solution treated*	≥450	≥170	≥30

Approximate Comparison Table Corrosion-Resistant Alloy

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!