Grade EN AB-AlSi10Mg(Fe)
European Standard Steel Grade EN AB-43400
Corresponding Standard EN 1676-2020
Aluminium and Aluminium Alloys — Alloyed Ingots for Remelting — Specifications
Classification Aluminum and Aluminum Alloys
EN AB-AlSi10Mg(Fe) Chemical Element Composition Content (%)
Component Fe Si Mn Ni Cu Ti Pb Zn Sn Mg Other Individual Other Total More
Minimum Value 0.45 9 - - - - - - - 0.25 - - Al: Remainder
Maximum Value 0.9 11 0.55 0.15 0.08 0.15 0.15 0.15 0.05 0.5 0.05 0.15
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
◎ “Others” does not include modifying or refining elements such as Na, Sr, Sb and P
◎ “Others” includes all the elements which are not listed in this table or without specific values.
◎ Other each: European Regulations and Directives need to be taken into account. See [5] to [8] for information
① Refining agents such as Ti, B or master alloys containing nucleating particles such as TiB2 shall not be considered as impurities. Nevertheless, the minimum and maximum content of refining elements should be agreed between the manufacturer and the purchaser.
② European Regulations and Directives need to be taken into account. See [5] to [8] for information。
Approximate Comparison Table Die Casting Aluminum Alloys
China Japan United States European Standard
GB ISC JIS ASTM EN
YZAlSi10Mg YL101 AD3.1 A360.1 EN AB-43400

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!