A1050P 1050 - JIS H 4000-2022

Grade	A1050P
	1050
Corresponding Standard	JIS H 4000-2022 Aluminium and Aluminium Alloy Sheets, Strips and Plates
Classification	Aluminum and Aluminum Alloys

A1050P Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	V	Al	Zn	Mg	Other Individual
Minimum Value	-	-	-	-	-	-	99.5	-	-	-
Maximum Value	0.4	0.25	0.05	0.05	0.03	0.05	-	0.05	0.05	0.03

A1050P Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
4≤t≤6.5	A1050P-H112	H112	≥85	≥45	≥10
6.5＜t≤13			≥80	≥45	≥10
13＜t≤25			≥70	≥35	≥16
25＜t≤50			≥65	≥30	≥22
50＜t≤75			≥65	≥20	≥22
0.2≤t≤0.5	A1050P-O	O	60~100	-	≥15
0.5＜t≤0.8			60~100	-	≥20
0.8＜t≤1.3			60~100	≥20	≥25
1.3＜t≤6.5			60~100	≥20	≥30
6.5＜t≤50			60~100	≥20	≥28
0.2≤t≤0.3	A1050P-H12 A1050P-H22	H12 H22	80~120	-	≥2
0.3＜t≤0.5			80~120	-	≥3
0.5＜t≤0.8			80~120	-	≥4
0.8＜t≤1.3			80~120	≥65	≥6
1.3＜t≤2.9			80~120	≥65	≥8
2.9＜t≤12			80~120	≥65	≥9
0.2≤t≤0.3	A1050P-H14 A1050P-H24	H14 H24	95~125	-	≥1
0.3＜t≤0.5			95~125	-	≥2
0.5＜t≤0.8			95~125	-	≥3
0.8＜t≤1.3			95~125	≥75	≥4
1.3＜t≤2.9			95~125	≥75	≥5
2.9＜t≤12			95~125	≥75	≥6
0.2≤t≤0.5	A1050P-H16 A1050P-H26	H16 H26	120~145	-	≥1
0.5＜t≤0.8			120~145	-	≥2
0.8＜t≤1.3			120~145	≥85	≥3
1.3＜t≤4			120~145	≥85	≥4
0.2≤t≤0.5	A1050P-H18	H18	≥125	-	≥1
0.5＜t≤0.8			≥125	-	≥2
0.8＜t≤1.3			≥125	-	≥3
1.3＜t≤3			≥125	-	≥4

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!