A1085P 1085 - JIS H 4000-2022

Grade	A1085P
	1085
Corresponding Standard	JIS H 4000-2022 Aluminium and Aluminium Alloy Sheets, Strips and Plates
Classification	Aluminum and Aluminum Alloys

A1085P Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	V	Al	Zn	Mg	Ga	Other Individual
Minimum Value	-	-	-	-	-	-	99.85	-	-	-	-
Maximum Value	0.12	0.1	0.02	0.03	0.02	0.05	-	0.03	0.02	0.03	0.01

A1085P Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
4≤t≤6.5	A1085P-H112	H112	≥75	≥35	≥13
6.5＜t≤13			≥70	≥35	≥15
13＜t≤25			≥60	≥25	≥20
25＜t≤50			≥55	≥20	≥25
50＜t≤75			≥55	≥15	≥25
0.2≤t≤0.3	A1085P-O	O	55~95	-	≥15
0.3＜t≤0.5			55~95	-	≥20
0.5＜t≤0.8			55~95	-	≥25
0.8＜t≤1.3			55~95	≥15	≥30
1.3＜t≤13			55~95	≥15	≥35
13≤t≤50			55~95	≥15	≥30
0.2≤t≤0.3	A1085P-H12 A1085P-H22	H12 H22	70~110	-	≥2
0.3＜t≤0.5			70~110	-	≥3
0.5＜t≤0.8			70~110	-	≥4
0.8＜t≤1.3			70~110	≥55	≥6
1.3＜t≤2.9			70~110	≥55	≥8
2.9＜t≤12			70~110	≥55	≥9
0.2≤t≤0.3	A1085P-H14 A1085P-H24	H14 H24	85~120	-	≥1
0.3＜t≤0.5			85~120	-	≥2
0.5＜t≤0.8			85~120	-	≥3
0.8＜t≤1.3			85~120	≥65	≥4
1.3＜t≤2.9			85~120	≥65	≥5
2.9＜t≤12			85~120	≥65	≥6
0.2≤t≤0.5	A1085P-H16 A1085P-H26	H16 H26	100~135	-	≥1
0.5＜t≤0.8			100~135	-	≥2
0.8＜t≤1.3			100~135	≥75	≥3
1.3＜t≤4			100~135	≥75	≥4
0.2≤t≤0.5	A1085P-H18	H18	≥120	-	≥1
0.5＜t≤0.8			≥120	-	≥2
0.8＜t≤1.3			≥120	-	≥3
1.3＜t≤3			≥120	-	≥4

Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China	Japan	United States		International Organization for Standardization		European Standard
GB	JIS	ASTM	UNS	ISO	Numerical Grade	EN
1085	1085 A91085	1085	A91085	Al99.85	A91085	EN-AW-Al99.85

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!