A1070P 1070 - JIS H 4000-2022

Grade	A1070P
	1070
Corresponding Standard	JIS H 4000-2022 Aluminium and Aluminium Alloy Sheets, Strips and Plates
Classification	Aluminum and Aluminum Alloys

A1070P Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	V	Al	Zn	Mg	Other Individual
Minimum Value	-	-	-	-	-	-	99.7	-	-	-
Maximum Value	0.25	0.2	0.03	0.04	0.03	0.05	-	0.04	0.03	0.03

A1070P Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
4≤t≤6.5	A1070P-H112	H112	≥75	≥35	≥13
6.5＜t≤13			≥70	≥35	≥15
13＜t≤25			≥60	≥25	≥20
25＜t≤50			≥55	≥20	≥25
50＜t≤75			≥55	≥15	≥25
0.2≤t≤0.3	A1070P-O	O	55~95	-	≥15
0.3＜t≤0.5			55~95	-	≥20
0.5＜t≤0.8			55~95	-	≥25
0.8＜t≤1.3			55~95	≥15	≥30
1.3＜t≤13			55~95	≥15	≥35
13≤t≤50			55~95	≥15	≥30
0.2≤t≤0.3	A1070P-H12 A1070P-H22	H12 H22	70~110	-	≥2
0.3＜t≤0.5			70~110	-	≥3
0.5＜t≤0.8			70~110	-	≥4
0.8＜t≤1.3			70~110	≥55	≥6
1.3＜t≤2.9			70~110	≥55	≥8
2.9＜t≤12			70~110	≥55	≥9
0.2≤t≤0.3	A1070P-H14 A1070P-H24	H14 H24	85~120	-	≥1
0.3＜t≤0.5			85~120	-	≥2
0.5＜t≤0.8			85~120	-	≥3
0.8＜t≤1.3			85~120	≥65	≥4
1.3＜t≤2.9			85~120	≥65	≥5
2.9＜t≤12			85~120	≥65	≥6
0.2≤t≤0.5	A1070P-H16 A1070P-H26	H16 H26	100~135	-	≥1
0.5＜t≤0.8			100~135	-	≥2
0.8＜t≤1.3			100~135	≥75	≥3
1.3＜t≤4			100~135	≥75	≥4
0.2≤t≤0.5	A1070P-H18	H18	≥120	-	≥1
0.5＜t≤0.8			≥120	-	≥2
0.8＜t≤1.3			≥120	-	≥3
1.3＜t≤3			≥120	-	≥4

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!