A1060P 1060 - JIS H 4000-2022

Grade	A1060P
	1060
Corresponding Standard	JIS H 4000-2022 Aluminium and aluminium alloy sheets, strips and plates
Classification	Aluminum and Aluminum Alloys

A1060P Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	V	Al	Zn	Mg	Other Individual
Minimum Value	-	-	-	-	-	-	99.6	-	-	-
Maximum Value	0.35	0.25	0.03	0.05	0.03	0.05	-	0.05	0.03	0.03

A1060P Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
4≤t≤6.5	A1060P-H112	H112	≥75	≥35	≥10
6.5＜t≤13			≥70	≥35	≥10
13＜t≤25			≥60	≥25	≥16
25＜t≤50			≥55	≥20	≥22
0.8≤t≤1.3	A1060P-H14 A1060P-H24	H14 H24	≥85	≥65	≥4
1.3＜t≤2.9			≥85	≥65	≥5
2.9＜t≤12			≥85	≥65	≥6

Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China	Japan	United States		International Organization for Standardization		European Standard
GB	JIS	ASTM	UNS	ISO	Numerical Grade	EN
1060	1060 A91060	1060	A91060	Al99.6	A91060	EN-AW-Al99.6

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!