A1050AP 1050A - JIS H 4000-2022 - H2ABC

中文版

Grade	A1050AP
	1050A
Corresponding Standard	JIS H 4000-2022 Aluminium and aluminium alloy sheets, strips and plates
Classification	Aluminum and Aluminum Alloys

A1050AP Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cu	Ti	V	Al	Zn	Mg	Other Individual
Minimum Value	-	-	-	-	-	-	99.5	-	-	-
Maximum Value	0.4	0.25	0.05	0.05	0.05	0.05	-	0.07	0.05	0.03

A1050AP Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
0.2≤t≤0.5	A1050AP-O	O	65~95	≥20	≥20
0.5＜t≤1.5			65~95	≥20	≥22
1.5＜t≤3.0			65~95	≥20	≥26
3.0＜t≤6.0			65~95	≥20	≥29
6＜t≤12.5			65~95	≥20	≥35
12.5＜t≤25			65~95	≥20	≥32
0.2≤t≤0.5	A1050AP-H14	H14	105~145	≥85	≥2
0.5＜t≤1.5			105~145	≥85	≥3
1.5＜t≤3.0			105~145	≥85	≥4
3.0＜t≤6.0			105~145	≥85	≥5
0.2≤t≤0.5	A1050AP-H24	H24	105~145	≥75	≥3
0.5＜t≤1.5			105~145	≥75	≥4
1.5＜t≤3.0			105~145	≥75	≥5
3.0＜t≤6.0			105~145	≥75	≥8
0.2≤t≤0.5	A1050AP-H18	H18	≥140	≥120	≥1
0.5＜t≤1.5			≥140	≥120	≥2
1.5＜t≤3.0			≥140	≥120	≥2

Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China	Japan	United States		International Organization for Standardization		France	European Standard	Russia
GB	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	EN	GOST
1050A	1050A A91050	1050A	A91050	Al99.5(A)	A91050	A5 1050A A91050	EN-AW-Al99.5(A)	АД0/1011

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!