A1230AP 1230A - JIS H 4000-2022

Grade	A1230AP
	1230A
Corresponding Standard	JIS H 4000-2022 Aluminium and Aluminium Alloy Sheets, Strips and Plates
Classification	Aluminum and Aluminum Alloys
Properties	Corrosion Resistance

A1230AP Chemical Element Composition Content (%)

Component	Mn	Cu	Al	Zn	Mg	Other Individual	More
Minimum Value	-	-	99.3	-	-	-	Si+Fe≤0.7
Maximum Value	0.05	0.1	-	0.05	0.05	0.03	Si+Fe≤0.7

A1230AP Mechanical Properties

thickness t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
4≤t≤6.5	A1230AP-H112	H112	≥95	≥50	≥9
6.5＜t≤13			≥90	≥50	≥9
13＜t≤50			≥85	≥35	≥14
50＜t≤75			≥80	≥25	≥20
0.2≤t≤0.5	A1230AP-O	O	75~105	≥25	≥17
0.5＜t≤0.8			75~105	≥25	≥22
0.8＜t≤1.3			75~105	≥25	≥22
1.3＜t≤6.5			75~105	≥25	≥30
6.5＜t≤75			75~105	≥25	A50mm: ≥28 A: ≥25
0.2≤t≤0.3	A1230AP-H12 A1230AP-H22	H12 H22	95~125	≥75	≥2
0.3＜t≤0.5			95~125	≥75	≥3
0.5＜t≤0.8			95~125	≥75	≥4
0.8＜t≤1.3			95~125	≥75	≥6
1.3＜t≤2.9			95~125	≥75	≥8
2.9＜t≤12			95~125	≥75	≥9
0.2≤t≤0.3	A1230AP-H14 A1230AP-H24	H14 H24	120~145	≥95	≥1
0.3＜t≤0.5			120~145	≥95	≥2
0.5＜t≤0.8			120~145	≥95	≥3
0.8＜t≤1.3			120~145	≥95	≥4
1.3＜t≤2.9			120~145	≥95	≥5
2.9＜t≤12			120~145	≥95	≥6
0.2≤t≤0.5	A1230AP-H16 A1230AP-H26	H16 H26	135~165	≥115	≥1
0.5＜t≤0.8			135~165	≥115	≥2
0.8＜t≤1.3			135~165	≥115	≥3
1.3＜t≤4			135~165	≥115	≥4
0.2≤t≤0.5	A1230AP-H18	H18	≥150	≥130	≥1
0.5＜t≤0.8			≥150	≥130	≥2
0.8＜t≤1.3			≥150	≥130	≥3
1.3＜t≤3.0			≥150	≥130	≥4

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!