Grade 20MnCr5
Corresponding Standard ISO 4954-1-2024
Steels for cold heading and cold extruding - Technical delivery conditions - Part1: Non-alloy and alloy steels
Classification Alloy Steel
20MnCr5 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Cu
Minimum Value 0.17 - 1.1 - - 1 -
Maximum Value 0.22 0.3 1.4 0.025 0.035 1.3 0.25
20MnCr5 Mechanical Properties
diameter
d
mm
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Reduction of Area
ψ
%
Hardness
HBW
5<d≤40 +AC ≤570 ≥60
5<d≤40 +FP HB: 152~201
2≤d≤5 +AR+C+AC ≤570 ≥62
5<d≤40 ≤550 ≥62
2≤d≤5 +AR+C+AC+LC ≤610 ≥60
5<d≤40 ≤590 ≥60
5<d≤10 +AC+C ≤680 ≥57
10<d≤40 ≤670 ≥57
①+AR=as hot-rolled;+AR or +PE=as hot-rolled or peeled;+AR+C=as hot-rolled+cold drawn;+AR+C+AC=as hot-rolled+cold drawn+spheroidized;+AR+C+AC+LC=as hot-rolled+cold drawn+spheroidized+skin passed;+AC= spheroidized ;+AC or +AC+PE=spheroidized or spheroidized+peeled;+AC+C=spheroidized +cold drawn;+FP=treated to ferrite-pearlite structure and hardness range;+AC+C+AC=spheroidized +cold drawn + spheroidized;+AC+C+AC+LC=spheroidized +cold drawn + spheroidized + skin passed
1 Approximate Comparison Table Structural Alloy Steel
China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia
GB ISC JIS KS ASTM/AISI UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST
20CrMn
20CrMnH
A22202 SMnC420 SMnC420 5120 G51200 20MnCr5 20MnCr5 1.7147 20MC5 20MnCr5 1.7147 20ХГ
2 Approximate Comparison Table Structural Alloy Steel
China Japan United States International Organization for Standardization Germany France European Standard Russia
GB JIS SAE ISO W-Nr. NF EN/NF EN Numerical Grade GOST
20CrMn
20CrMnTi
20MnCr
SMnC420H 5120 20MnCr5 20MnCr5 20MC5 20MnCr5 1.7147 18KHG

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!