中文版
Home Material ISO 4954-2-2024
简体 | 繁體
Grade X2CrNiMo17-12-2
ISO Numeric Designation 4404-316-03-I
Corresponding Standard ISO 4954-2-2024
Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
X2CrNiMo17-12-2 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Cu Mo N
Minimum Value - - - - - 16.5 10 - 2 -
Maximum Value 0.03 1 2 0.045 0.03 18.5 13 1 3 0.1
X2CrNiMo17-12-2 Mechanical Properties
diameter
d
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Reduction of Area
ψ
%
5＜d≤50 +AT or +AT+PE ≤650 ≥68
5＜d≤10 +AT+C ≤800 -
10＜d≤25 ≤750 -
0.8≤d≤2 +AT+C+AT ≤720 ≥68
2＜d≤5 ≤700 ≥68
5＜d≤25 ≤650 ≥68
0.8≤d≤2 +AT+C+AT+LC ≤800 ≥63
2＜d≤5 ≤750 ≥63
5＜d≤25 ≤700 ≥63
• +AT or +AT+PE=Solution annealed or solution annealed + peeled；+AT+C=Solution annealed + cold drawn；+AT+C+AT=Solution annealed + cold drawn + Solution annealed；+AT+C+AT+LC=Solution annealed + cold drawn + Solution annealed + skin passed；+A or +A+PE=Soft annealed or soft annealed + peeled；+A+LC=soft annealed + skin passed；+A+C+A=soft annealed + cold drawn + soft annealed；+A+C+A+LC=soft annealed + cold drawn + soft annealed + skin passed
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
022Cr17Ni12Mo2
(00Cr17Ni14Mo2) 		S31603 316L SUS 316L STS 316L 316L S31603 X2CrNiMo 17-12-2
X2CrNiMo17-12-3 		4404-316-03-I
4432-316-03-I 		X2CrNiMo 18-14-3
(X2CrNiMo 18-12) 		1.4435 Z2CND 17-13 X2CrNiMo 17-12-2
X2CrNiMo17-12-3 		1.4404
1.4432 		03Х17Н14М2 2353 316S11
316S12
2 Approximate Comparison Table Stainless steels for cold heading and cold extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
022Cr17Ni12Mo2
(00Cr17Ni14Mo2) 		S31603 SUS316L 316L S31603 X2CrNiMo17-12-2 4404-316-03-I X2CrNiMo17-12-2 1.4404
X2CrNiMo17-12-2 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X2CrNiMo 17-12-2 1.4404
2 EN 10296-2-2005
X2CrNiMo17-12-2 1.4404
3 EN 10253-4-2003
X2CrNiMo17-12-2 1.4404
4 EN 10263-5-2001
X2CrNiMo17-12-2 1.4404
5 EN 10269-2006
X2CrNiMo17-12-2 1.4404
6 EN 10250-4-1999
X2CrNiMo 17-12-2 1.4404
7 ISO TS 15510-2003
X2CrNiMo17-12-2
8 EN 10088-2-2005
X2CrNiMo17-12-2 1.4404
9 EN 10088-3-2005
X2CrNiMo 17-12-2 1.4404
10 EN 10269-2013
X2CrNiMo 17-12-2 1.4404
11 EN 10088-3-2014
X2CrNiMo 17-12-2 1.4404
12 ISO 15510-2014
X2CrNiMo17-12-2 4404-316-03-I
13 NF EN 10269-1999
X2CrNiMo17-12-2 1.4404
14 DIN EN 10263-5-2018
X2CrNiMo 17-12-2 1.4404
15 DIN EN 10269-2014
X2CrNiMo 17-12-2 1.4404
16 ISO 9328-7-2018
X2CrNiMo17-12-2
17 DIN EN 10088-3-2014
X2CrNiMo 17-12-2 1.4404
18 ISO 683-18-2014
X2CrNiMo17-12-2 4404-316-03-I
19 ISO 4954-2018
X2CrNiMo17-12-2 4404-316-03-I
20 NF EN 10088-2-2005
X2CrNiMo17-12-2 1.4404
21 NF EN 10088-1-2005
X2CrNiMo17-12-2 1.4404
22 NF EN 10028-7-2008
X2CrNiMo17-12-2 1.4404
23 NF EN 10296-2-2005
X2CrNiMo17-12-2 1.4404
24 NF EN 10028-7-2000
X2CrNiMo17-12-2 1.4404
25 EN 10263-5-2017
X2CrNiMo 17-12-2 1.4404
26 ISO 4954-2-2024
X2CrNiMo17-12-2 4404-316-03-I
27 DIN EN 10296-2-2006
X2CrNiMo17-12-2 1.4404

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!