中文版
Home Material ISO 4954-2-2024
简体 | 繁體
Grade X2CrNiMoN17-13-3
ISO Numeric Designation 4429-316-53-I
Corresponding Standard ISO 4954-2-2024
Steels for cold heading and cold extruding — Technical delivery conditions — Part 2: Stainless steels
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
X2CrNiMoN17-13-3 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Cu Mo N
Minimum Value - - - - - 16.5 10.5 - 2.5 0.12
Maximum Value 0.03 1 2 0.045 0.015 18.5 13 1 3 0.22
X2CrNiMoN17-13-3 Mechanical Properties
diameter
d
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Reduction of Area
ψ
%
5＜d≤50 +AT or +AT+PE ≤780 ≥60
5＜d≤10 +AT+C ≤940 -
10＜d≤25 ≤910 -
2≤d≤5 +AT+C+AT ≤820 ≥60
5＜d≤10 ≤800 ≥60
10＜d≤25 ≤780 ≥60
2≤d≤5 +AT+C+AT+LC ≤870 ≥55
5＜d≤10 ≤850 ≥55
• +AT or +AT+PE=Solution annealed or solution annealed + peeled；+AT+C=Solution annealed + cold drawn；+AT+C+AT=Solution annealed + cold drawn + Solution annealed；+AT+C+AT+LC=Solution annealed + cold drawn + Solution annealed + skin passed；+A or +A+PE=Soft annealed or soft annealed + peeled；+A+LC=soft annealed + skin passed；+A+C+A=soft annealed + cold drawn + soft annealed；+A+C+A+LC=soft annealed + cold drawn + soft annealed + skin passed
Approximate Comparison Table Stainless Steels for Cold Heading and Cold Extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
022Cr17Ni12Mo2N
(00Cr17Ni13Mo2N) 		S31653 SUS316LN 316LN S31653 X2CrNiMoN17-12-3 4429-316-53-I X2CrNiMoN17-12-3 1.4429
X2CrNiMoN17-13-3 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X2CrNiMoN 17-13-3 1.4429
2 EN 10296-2-2005
X2CrNiMoN17-13-3 1.4429
3 EN 10253-4-2003
X2CrNiMoN 17-13-3 1.4429
4 EN 10263-5-2001
X2CrNiMoN17-13-3 1.4429
5 EN 10269-2006
X2CrNiMoN17-13-3 1.4429
6 EN 10250-4-1999
X2CrNiMoN 17-13-3 1.4429
7 EN 10088-2-2005
X2CrNiMoN 17-13-3 1.4429
8 DIN 17440-1972
X2CrNiMoN 17-13-3 X2CrNiMoN 18-13 1.4429
9 EN 10088-3-2005
X2CrNiMoN 17-13-3 1.4429
10 EN 10297(2)-2005
X2CrNiMoN 17-13-3 1.4429
11 EN 10269-2013
X2CrNiMoN 17-13-3 1.4429
12 EN 10088-3-2014
X2CrNiMoN 17-13-3 1.4429
13 NF EN 10269-1999
X2CrNiMoN17-13-3 1.4429
14 DIN EN 10263-5-2018
X2CrNiMoN 17-13-3 1.4429
15 DIN EN 10269-2014
X2CrNiMoN 17-13-3 1.4429
16 ISO 9328-7-2018
X2CrNiMoN17-13-3
17 DIN EN 10088-3-2014
X2CrNiMoN 17-13-3 1.4429
18 ISO 4954-2018
X2CrNiMoN17-13-3 4429-316-53-I
19 NF EN 10088-2-2005
X2CrNiMoN17-13-3 1.4429
20 NF EN 10088-1-2005
X2CrNiMoN17-13-3 1.4429
21 NF EN 10028-7-2008
X2CrNiMoN17-13-3 1.4429
22 NF EN 10296-2-2005
X2CrNiMoN17-13-3 1.4429
23 NF EN 10028-7-2000
X2CrNiMoN17-13-3 1.4429
24 EN 10263-5-2017
X2CrNiMoN 17-13-3 1.4429
25 ISO 4954-2-2024
X2CrNiMoN17-13-3 4429-316-53-I
26 DIN EN 10296-2-2006
X2CrNiMoN17-13-3 1.4429
27 EN 10272-2016
X2CrNiMoN17-13-3 1.4429

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!