MAG-F-101 Mg-Mn1.5 - BS 3372-1970

Grade	MAG-F-101
Other Names
Corresponding Standard	BS 3372-1970 Wrought Magnesium Alloys for General Engineering Purposes — Forgings and Cast Forging Stock
Classification	Magnesium and Magnesium Alloys

MAG-F-101 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Ni	Cu	Al	Zn	Ca	More
Minimum Value	-	-	1	-	-	-	-	-	Mg:余量
Maximum Value	0.03	0.02	2	0.005	0.02	0.05	0.03	0.02	Mg:余量

MAG-F-101 Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
M	≥200	* ≥105	≥4

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!