ЛЖС58-1-1 - GOST 2060-2006

Grade	ЛЖС58-1-1
Corresponding Standard	GOST 2060-2006 Brass rods Specifications
Classification	Copper and Copper Alloys
Density	8.4 g/cm³

ЛЖС58-1-1 Chemical Element Composition Content (%)

Component	Fe	P	Cu	Pb	Bi	Sb	Other Total	More
Minimum Value	0.7	-	56	0.7	-	-	-	Zn:余量
Maximum Value	1.3	0.02	58	1.3	0.003	0.01	0.5	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

ЛЖС58-1-1 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Hardness HBW
Drawing rod, 3≤d≤50	Half Hard	≥440	δ5：- δ10：≥10	-
Drawing rod, 3≤d≤50	Half Hard	-	-	HB: ≥130 HV: -
Extruded bars, 10≤d≤180		≥290	δ5：- δ10：≥20	-
Extruded bars, 10≤d≤180		-	-	-

Approximate Comparison Table brass

China		United States	International Organization for Standardization	Germany	France	Russia
GB	ISC	ASTM	ISO	W-Nr.	NF EN/NF	GOST
HFe58-1-1	T67610	57Cu-41Zn-1Fe-1Pb	CuZn41Fe1Pb1	CuZn41Fe1Pb1	CuZn41Fe1Pb1	ЛЖС58-1-1

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!