X2CrTi12 1.4512 - DIN EN 10296-2-2006

Grade	X2CrTi12
Germany W-Nr.	1.4512
Corresponding Standard	DIN EN 10296-2-2006 Welded Circular Steel Tubes for Mechanical and General Engineering Purposes — Technical Delivery Conditions — Part 2 Stainless Steel
Classification	Ferritic Stainless Steel

X2CrTi12 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	N	More
Minimum Value	-	-	-	-	-	10.5	-	Ti:6×(C+N)~0.65
Maximum Value	0.03	1	1	0.04	0.015	12.5	0.03	Ti:6×(C+N)~0.65

X2CrTi12 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Steel pipe:	≥380	Rp0.2：≥210 Rp1.0：≥220	l：≥25 t：≥23

◎ l=longitudinal, t=transverse

◎ Resistance to intergranular corrosiona: No (When tested in accordance with EN ISO3651-2)

Approximate Comparison Table Heat-Resistant Stainless Steel

China		Japan	United States		International Organization for Standardization	Germany		France	United Kingdom
GB	ISC	JIS	ASTM	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	BS EN/BS
06Cr11Ti (0Cr11Ti)	S11168	SUH 409	409	S40900	X6CrTi 12	X5CrTi 12	1.4512	Z6CT 12	409S19

X2CrTi12 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!