Grade X6Cr17
Germany W-Nr. 1.4016
Corresponding Standard DIN EN 10296-2-2006
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Classification Ferritic Stainless Steel
X6Cr17 Chemical Element Composition Content (%)
Component C Si Mn P S Cr
Minimum Value - - - - - 16
Maximum Value 0.08 1 1 0.04 0.015 18
① a controlled sulfur content of 0,015% to 0,030% is specified.
X6Cr17 Mechanical Properties
condition Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Steel pipe: ≥430 Rp0.2:≥240
Rp1.0:≥250
l:≥20
t:≥18
◎ l=longitudinal, t=transverse
◎ Resistance to intergranular corrosiona: Yes (When tested in accordance with EN ISO3651-2), Normally not fulfilled in the sensitized or as-welded condition.
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
10Cr17
(1Cr17)
S11710 430 SUS 430 STS 430 430 S43000 X6Cr 17
8
ISO 683-13-1986
4016-430-00-I X6Cr 17
(X8Cr 17)
1.4016 Z8C 17 X6Cr 17 1.4016 12Х 17 2320 430S15
2 Approximate Comparison Table
China Japan United States Germany France European Standard Russia Sweden United Kingdom
GB JIS ASTM UNS DIN EN/DIN NF EN/NF EN Numerical Grade GOST SS BS EN/BS
1Cr15 SUS430 430 S43000 X6Cr17 Z8C17 X6Cr17 1.4016 12KH17 2320 430S17
430S18

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!