Grade X2CrNiMo17-12-2
Germany W-Nr. 1.4404
Corresponding Standard DIN EN 10296-2-2006
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Classification Austenitic Stainless Steel
X2CrNiMo17-12-2 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N
Minimum Value - - - - - 16.5 10 2 -
Maximum Value 0.03 1 2 0.045 0.015 18.5 13 2.5 0.11
① a controlled sulfur content of 0,015% to 0,030% is specified.
X2CrNiMo17-12-2 Mechanical Properties
condition Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Steel pipe: ≥490 Rp0.2:≥190
Rp1.0:≥225
l:≥40
t:≥30
◎ l=longitudinal, t=transverse
◎ Resistance to intergranular corrosiona: Yes (When tested in accordance with EN ISO3651-2)
1 Approximate Comparison Table
Germany France European Standard United Kingdom
DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade BS EN/BS
X2CrNiMo 17-13-2
(X2CrNiMo 18-10)
1.4404 Z2CND 17-12 X2CrNiMo 17-12-2 1.4404 316S11
2 Approximate Comparison Table Heat-resistant cast steels and alloys
United States Germany France
ASTM UNS DIN EN/DIN W-Nr. NF EN/NF
CF-3
CF-3M
J92700
J92800
G-X2CrNiMo18 10 1.4404 Z2CND18.12-M
Z3CND19.10-M

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!