X2CrNiMo17-12-3 1.4432 - DIN EN 10296-2-2006

Grade	X2CrNiMo17-12-3
Germany W-Nr.	1.4432
Corresponding Standard	DIN EN 10296-2-2006 Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Classification	Austenitic Stainless Steel

X2CrNiMo17-12-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	16.5	10.5	2.5	-
Maximum Value	0.03	1	2	0.045	0.015	18.5	13	3	0.11

① a controlled sulfur content of 0,015% to 0,030% is specified.

X2CrNiMo17-12-3 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Steel pipe:	≥490	Rp0.2：≥190 Rp1.0：≥225	l：≥40 t：≥30

◎ l=longitudinal, t=transverse

◎ Resistance to intergranular corrosiona: Yes (When tested in accordance with EN ISO3651-2).

X2CrNiMo17-12-3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!