中文版
Home Material DIN EN 10296-2-2006
简体 | 繁體
Grade X3CrNiMo17-13-3
Germany W-Nr. 1.4436
Corresponding Standard DIN EN 10296-2-2006
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Classification Austenitic Stainless Steel
X3CrNiMo17-13-3 Chemical Element Composition Content (%)
Component C Si Mn P S ① Cr Ni Mo N
Minimum Value - - - - - 16.5 10.5 2.5 -
Maximum Value 0.05 1 2 0.045 0.015 18.5 13 3 0.11
① a controlled sulfur content of 0,015% to 0,030% is specified.
X3CrNiMo17-13-3 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥510 Rp0.2：≥205
Rp1.0：≥240		 l：≥40
t：≥30
◎ l=longitudinal, t=transverse
◎ Resistance to intergranular corrosiona: Yes (When tested in accordance with EN ISO3651-2), Normally not fulfilled in the sensitized or as-welded condition.
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade SS BS EN/BS
06Cr17Ni12Mo2 S31608 316 SUS 316 STS 316 316 S31600 X5CrNiMo 17-12-2 4401-316-00-I X5CrNiMo 17-12-2
(X5CrNiMo 18-10)
X5CrNiMo 17-13-3
(X5CrNiMo 18-12) 		1.4401
1.4401
1.4436
1.4436 		Z6CND 17-11
Z6CND 17-12 		X5CrNiMo 17-12-2
X3CrNiMo 17-13-3 		1.4401
1.4436 		2347
2343 		316S16
316S31
2 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
06Cr17Ni12Mo2
(0Cr17Ni12Mo2)
0Cr18Ni12Mo2Ti 		S31608 316 SUS 316 STS 316 316 S31600 X5CrNiMo 17-12-2 X5CrNiMo 17-12-2
(X5CrNiMo 18-10)
X5CrNiMo 17-13-3
(X5CrNiMo 18-12) 		1.4401
1.4401
1.4436
1.4436 		Z6CND 17-11
Z6CND 17-12 		X5CrNiMo 17-12-2
X3CrNiMo 17-13-3 		1.4401
1.4436 		08Х17Н13М2Т 2347
2343 		316S16
316S31
X3CrNiMo17-13-3 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X3CrNiMo 17-13-3 1.4436
2 EN 10296-2-2005
X3CrNiMo17-13-3 1.4436
3 EN 10253-4-2003
X3CrNiMo17-13-3 1.4436
4 EN 10263-5-2001
X3CrNiMO17-13-3 1.4436
5 EN 10250-4-1999
X3CrNiMo 17-13-3 1.4436
6 EN 10088-2-2005
X3CrNiMo17-13-3 1.4436
7 EN 10088-3-2005
X3CrNiMo 17-13-3 1.4436
8 EN 10297(2)-2005
X3CrNiMo17-13-3 1.4436
9 EN 10088-3-2014
X3CrNiMo17-13-3 1.4436
10 DIN EN 10263-5-2018
X3CrNiMo 17-13-3 1.4436
11 DIN EN 10088-3-2014
X3CrNiMo17-13-3 1.4436
12 ISO 4954-2018
X3CrNiMo17-13-3 4436-316-00-I
13 NF EN 10088-2-2005
X3CrNiMo17-13-3 1.4436
14 NF EN 10088-1-2005
X3CrNiMo17-13-3 1.4436
15 NF EN 10028-7-2008
X3CrNiMo17-13-3 1.4436
16 NF EN 10296-2-2005
X3CrNiMo17-13-3 1.4436
17 NF EN 10028-7-2000
X3CrNiMo17-13-3 1.4436
18 EN 10263-5-2017
X3CrNiMo 17-13-3 1.4436
19 ISO 4954-2-2024
X3CrNiMo17-13-3 4436-316-00-I
20 DIN EN 10296-2-2006
X3CrNiMo17-13-3 1.4436

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!