中文版
Home Material DIN EN 10296-2-2006
简体 | 繁體
Grade X2CrNiMoN17-13-5
Germany W-Nr. 1.4439
Corresponding Standard DIN EN 10296-2-2006
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Classification Austenitic Stainless Steel
X2CrNiMoN17-13-5 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N
Minimum Value - - - - - 16.5 12.5 4 0.12
Maximum Value 0.03 1 2 0.045 0.015 18.5 14.5 5 0.22
X2CrNiMoN17-13-5 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥580 Rp0.2：≥285
Rp1.0：≥315		 l：≥35
t：≥30
◎ l=longitudinal, t=transverse
◎ Resistance to intergranular corrosiona: Yes (When tested in accordance with EN ISO3651-2).
X2CrNiMoN17-13-5 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X2CrNiMoN 17-13-5 1.4439
2 EN 10296-2-2005
X2CrNiMoN17-13-5 1.4439
3 EN 10253-4-2003
X2CrNiMoN17-13-5 1.4439
4 EN 10088-2-2005
X2CrNiMoN17-13-5 1.4439
5 EN 10088-3-2005
X2CrNiMoN17-13-5 1.4439
6 EN 10297(2)-2005
X2CrNiMoN17-13-5 1.4439
7 EN 10088-3-2014
X2CrNiMoN17-13-5 1.4439
8 ISO 15510-2014
X2CrNiMoN17-13-5 4439-317-26-E
9 ISO 9328-7-2018
X2CrNiMoN17-13-5
10 DIN EN 10088-3-2014
X2CrNiMoN17-13-5 1.4439
11 NF EN 10088-2-2005
X2CrNiMoN17-13-5 1.4439
12 NF EN 10088-1-2005
X2CrNiMoN17-13-5 1.4439
13 NF EN 10028-7-2008
X2CrNiMoN17-13-5 1.4439
14 NF EN 10296-2-2005
X2CrNiMoN17-13-5 1.4439
15 NF EN 10028-7-2000
X2CrNiMoN17-13-5 1.4439
16 DIN EN 10296-2-2006
X2CrNiMoN17-13-5 1.4439

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!