SUS 403 - JIS G 4315-2000

Grade	SUS 403
Corresponding Standard	JIS G 4315-2000 Stainless steel wires for cold heading and cold forging
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance

SUS 403 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni
Minimum Value	-	-	-	-	-	11.5	-
Maximum Value	0.15	0.5	1	0.04	0.03	13	0.6

SUS 403 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
wire (WSB); 0.8 ≤ d < 2	Annealing	540~740		≥65
Wire WSB; 2≤d≤17	Annealing	460~640	≥10	≥65

Approximate Comparison Table

SUS403 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!