X2CrNiMoN25-7-4 1.4410 - DIN EN 10296-2-2006

Grade	X2CrNiMoN25-7-4
Germany W-Nr.	1.4410
Corresponding Standard	DIN EN 10296-2-2006 Welded Circular Steel Tubes for Mechanical and General Engineering Purposes — Technical Delivery Conditions — Part 2 Stainless Steel
Classification	Duplex Stainless Steel

X2CrNiMoN25-7-4 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	24	6	3	0.24
Maximum Value	0.03	1	2	0.035	0.015	26	8	4.5	0.35

X2CrNiMoN25-7-4 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Steel pipe:	≥800	Rp0.2：≥550	l：≥15

◎ l=longitudinal, t=transverse

◎ Resistance to intergranular corrosiona: Yes (When tested in accordance with EN ISO3651-2).

1 Approximate Comparison Table Austenitic-Ferritic Stainless Steel

China		Japan	United States		International Organization for Standardization		Germany		European Standard
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Numerical Grade
022Cr25Ni7Mo4N	S25073	UR 47N+	2507	S32750	X2CrNiMoN25-7-4	4410-327-50-E	X2CrNiMoN25-7-4	1.4410	X2CrNiMoN25-7-4	1.4410

2 Approximate Comparison Table Austenitic-Ferritic Stainless Steel

X2CrNiMoN25-7-4 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!