X2CrTi12 1.4512 - EN 10296-2-2005

Grade	X2CrTi12
European Standard Steel Grade	1.4512
Corresponding Standard	EN 10296-2-2005 Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Classification	Ferritic Stainless Steel

X2CrTi12 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	N	More
Minimum Value	-	-	-	-	-	10.5	-	Ti:6×(C+N)~0.65
Maximum Value	0.03	1	1	0.04	0.015	12.5	0.03	Ti:6×(C+N)~0.65

X2CrTi12 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Steel pipe:	≥380	Rp0.2：≥210 Rp1.0：≥220	l：≥25 t：≥23

◎ l=longitudinal, t=transverse

◎ Resistance to intergranular corrosiona: No (When tested in accordance with EN ISO3651-2)

1 Approximate Comparison Table Ferritic Stainless Steel

China		Japan	United States		International Organization for Standardization		France	European Standard		United Kingdom
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	EN	Numerical Grade	BS EN/BS
022Cr11Ti	S11163	SUH409L SUS409L	409	S40900	X2CrTi12	4512-409-10-I	Z3CT12	X2CrTi12	1.4512	409S

2 Approximate Comparison Table Ferritic Stainless Steel

3 Approximate Comparison Table Ferritic Heat-Resistant Steel

China		Japan	United States	International Organization for Standardization		European Standard
GB	ISC	JIS	UNS	ISO	Numerical Grade	EN	Numerical Grade
022Cr11Ti GB/T 20878-2024	S11163	SUH409L	S40920 ASTM A959	X2CrTi12 ISO 15510	4512-409-10-Ⅰ	X2CrTi12	1.4512

X2CrTi12 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!