X2CrNi19-11 1.4306 - EN 10296-2-2005

Grade	X2CrNi19-11
European Standard Steel Grade	1.4306
Corresponding Standard	EN 10296-2-2005 Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Classification	Austenitic Stainless Steel

X2CrNi19-11 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Cr	Ni	N
Minimum Value	-	-	-	-	-	18	10	-
Maximum Value	0.03	1	2	0.045	0.015	20	12	0.11

① a controlled sulfur content of 0,015% to 0,030% is specified.

X2CrNi19-11 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Steel pipe:	≥460	Rp0.2：≥180 Rp1.0：≥215	l：≥40 t：≥35

◎ l=longitudinal, t=transverse

◎ Resistance to intergranular corrosiona: Yes (When tested in accordance with EN ISO3651-2)

1 Approximate Comparison Table

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

European Standard

Russia

United Kingdom

ISC

CNS

JIS

ASTM

UNS

ISO

Numerical Grade

DIN EN/DIN

W-Nr.

NF EN/NF

Numerical Grade

GOST

BS EN/BS

022Cr19Ni10
(00Cr19Ni10)

S30403

304L

SUS 304L

STS 304L

304L

S30403

X2CrNi 19-11
X2CrNi 18-9

4306-304-03-I
4307-304-03-I

X2CrNi 19-11
(X2CrNi 18-9)

1.4306

Z2CN 18-10
Z2CN 18-09

X2CrNi 19-11
X2CrNi 18-9

1.4306
1.4307

03Х18Н10

304S12

2 Approximate Comparison Table

Japan	United States	France	European Standard		Russia	Sweden	United Kingdom
JIS	ASTM	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
SUS304L	304L	Z2CN18-10 Z3CN18-10	X2CrNi19-11	1.4306	03KH18N11	2352	304S11

3 Approximate Comparison Table Stainless steels for cold heading and cold extruding

China		Japan	United States		International Organization for Standardization		European Standard
GB	ISC	JIS	ASTM/AISI	UNS	ISO	Numerical Grade	EN	Numerical Grade
022Cr19Ni10 (00Cr19Ni10)	S30403	SUS304L	304L	S30403	X2CrNi19-11	4306-304-03-I	X2CrNi19-11	1.4306

X2CrNi19-11 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X2CrNi 19-11 1.4306
2	EN 10296-2-2005
	X2CrNi19-11 1.4306
3	EN 10253-4-2003
	X2CrNi19-11 1.4306
4	EN 10263-5-2001
	X2CrNi19-11 1.4306
5	EN 10250-4-1999
	X2CrNi 19-11 1.4306
6	ISO TS 15510-2003
	X2CrNi19-11
7	DIN 17440-1972
	X2CrNi 19-11 X2CrNi 18-9 1.4306
8	EN 10088-3-2005
	X2CrNi 19-11 1.4306
9	EN 10088-3-2014
	X2CrNi 19-11 1.4306
10	DIN EN 10263-5-2018
	X2CrNi19-11 1.4306
11	ISO 9328-7-2018
	X2CrNi19-11
12	DIN EN 10088-3-2014
	X2CrNi 19-11 1.4306
13	ISO 683-18-2014
	X2CrNi19-11 4306-304-03-I
14	ISO 4954-2018
	X2CrNi19-11 4306-304-03-I
15	NF EN 10088-2-2005
	X2CrNi19-11 1.4306
16	NF EN 10088-1-2005
	X2CrNi19-11 1.4306
17	NF EN 10028-7-2008
	X2CrNi19-11 1.4306
18	NF EN 10296-2-2005
	X2CrNi19-11 1.4306
19	NF EN 10028-7-2000
	X2CrNi19-11 1.4306
20	EN 10263-5-2017
	X2CrNi19-11 1.4306
21	ISO 4954-2-2024
	X2CrNi19-11 4306-304-03-I
22	DIN EN 10296-2-2006
	X2CrNi19-11 1.4306

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!