X2CrNiMo18-14-3 1.4435 - EN 10296-2-2005

Grade	X2CrNiMo18-14-3
European Standard Steel Grade	1.4435
Corresponding Standard	EN 10296-2-2005 Welded Circular Steel Tubes for Mechanical and General Engineering Purposes — Technical Delivery Conditions — Part 2 Stainless Steel
Classification	Austenitic Stainless Steel

X2CrNiMo18-14-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	17	12.5	2.5	-
Maximum Value	0.03	1	2	0.045	0.015	19	15	3	0.11

① a controlled sulfur content of 0,015% to 0,030% is specified.

X2CrNiMo18-14-3 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Steel pipe:	≥490	Rp0.2：≥190 Rp1.0：≥225	l：≥40 t：≥35

◎ l=longitudinal, t=transverse

◎ Resistance to intergranular corrosiona: Yes (When tested in accordance with EN ISO3651-2).

Approximate Comparison Table Austenitic Stainless Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
00Cr17Ni14Mo2	SUS316L	316L TP316L	Type19a	X2CrNiMo18-14-3	Z3CND17-12-03 Z3CND18-14-03	X2CrNiMo18-14-3	1.4435	03KH17N14M3	2353	316S13 316S14

X2CrNiMo18-14-3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!