中文版
Home Material EN 10296-2-2005
简体 | 繁體
Grade X12CrNi23-13
European Standard Steel Grade 1.4833
Corresponding Standard EN 10296-2-2005
Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Classification Austenitic Stainless Steel
X12CrNi23-13 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni N
Minimum Value - - - - - 22 12 -
Maximum Value 0.15 1 2 0.045 0.015 24 14 0.11
X12CrNi23-13 Mechanical Properties
condition Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Steel pipe: ≥500 Rp0.2：≥210
Rp1.0：≥250		 l：≥35；t：≥35
◎ l=longitudinal, t=transverse
◎ Elongation 20% min for wall thickness ≤35 mm after cold deformation.
1 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST
06Cr23Ni13
(0Cr23Ni13) 		S30908 309S SUS 309S STS 309S 309S S30908 X12CrNi 23-13
X6CrNi23-13 		X7CrNi 23-14 1.4833 Z15CN 24-13 X12CrNi 23-13
X6CrNi23-13 		1.4833
1.4950 		10Х23Н13
2 Approximate Comparison Table
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST
06Cr23Ni13
(0Cr23Ni13) 		S30908 309S SUS 309S STS 309S 309S S30908 X12CrNi 23-13 X7CrNi 23-14
X12CrNi 23-13 		1.4833
1.4833 		Z15CN 24-13 X12CrNi 23-13 1.4833 10Х23Н13
3 Approximate Comparison Table
China Japan United States International Organization for Standardization European Standard
ISC JIS UNS ISO Numerical Grade Numerical Grade
S30908 SUH309 S30908 X18CrNi23-13 4833-309-08-I 1.4833
4 Approximate Comparison Table
Japan United States France European Standard Russia United Kingdom
JIS ASTM UNS NF EN/NF EN Numerical Grade GOST BS EN/BS
SUS309S 309S S30908 Z15CN23-13 X12CrNi23-13 1.4833 20KH23N13 309S16
309S24
X12CrNi23-13 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X12CrNi 23-13 1.4833
2 ISO 4955-2005
X12CrNi23-13 (15)
3 EN 10296-2-2005
X12CrNi23-13 1.4833
4 DIN EN 10095-2018
X12CrNi 23-13 1.4833
5 NF EN 10088-1-2005
X12CrNi23-13 1.4833
6 NF EN 10296-2-2005
X12CrNi23-13 1.4833
7 DIN EN 10296-2-2006
X12CrNi23-13 1.4833

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!