X6NiCrSiNCe35-25 1.4854 - EN 10296-2-2005

Grade	X6NiCrSiNCe35-25
European Standard Steel Grade	1.4854
Corresponding Standard	EN 10296-2-2005 Welded circular steel tubes for mechanical and general engineering purposes — Technical delivery conditions — Part 2 Stainless steel
Classification	Austenitic Stainless Steel

X6NiCrSiNCe35-25 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N	Ce
Minimum Value	0.04	1.2	-	-	-	24	34	0.12	0.03
Maximum Value	0.08	2	2	0.04	0.015	26	36	0.2	0.08

X6NiCrSiNCe35-25 Mechanical Properties

condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Steel pipe:	≥650	Rp0.2：≥300 Rp1.0：≥340	l：≥40；t：≥40

◎ l=longitudinal, t=transverse

◎ Elongation 20% min for wall thickness ≤35 mm after cold deformation.

Approximate Comparison Table Austenitic Stainless Steel

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	EN	Numerical Grade
S35315	X6NiCrSiNCe35-25	4854-353-15-E	X6NiCrSiNCe35-25	1.4854

X6NiCrSiNCe35-25 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!